Question 1

Who is the leading supplier of colour coated sheets and roofing in Nagpur?

Accepted Answer

Shourya Roof is Central India's premier supplier for colour coated sheets and industrial roofing in Nagpur. We supply genuine primary steel coils from JSW Steel, Jindal Steel, and AM/NS India. Operating from our regional office at Plot 172, Gorewada Road, Nagpur, we coordinate continuous supply of PPGL/PPGI trapezoidal profile sheets, bare galvalume roof sheets, PUF panels, and 8-piece roofing accessories with direct mill pricing and prompt site dispatch.

Question 2

What is the live price of colour coated sheets and roofing in Nagpur per sq ft or per kg?

Accepted Answer

Direct mill prices for colour coated sheets (PPGL/PPGI) and roofing in Nagpur fluctuate with primary steel coil index rates from JSW and Jindal. Pricing typically ranges from ₹65 to ₹85+ per kg (or approximately ₹22 to ₹38 per sq. ft. depending on thickness from 0.35mm to 0.80mm and coating specs). Call us directly at +91 99222 61637 or message on WhatsApp for today's live rate lock with direct mill invoicing.

Question 3

Which brand of colour coated sheet is best for factory roofing in Nagpur (JSW vs Jindal)?

Accepted Answer

Both JSW Steel (Silveron+ / Pragati) and Jindal Steel produce high-tensile 550 MPa (G550) coils with AZ-150 sacrificial alloy coatings that excel in Central India's extreme summer heat and heavy monsoons. JSW offers superior SMP/PVDF coating technology for severe industrial zones, while Jindal delivers high tensile yield and structural span stiffness. We source both 100% prime mill brands directly with verified Mill Test Certificates (MTC).

Question 4

What are the standard specifications of trapezoidal colour coated profile sheets?

Accepted Answer

Our trapezoidal colour coated profile sheets feature a 1020mm effective cover width (1070mm overall width), 28mm to 30mm deep crest ribs for maximum rainwater discharge, and 195mm–200mm center-to-center pitch. Built from 550 MPa (G550) high-tensile steel with AZ-70 to AZ-150 GSM alloy coating, each sheet includes an engineered anti-capillary siphon drain groove to eliminate water seepage during severe monsoons.

Question 5

How does custom cut-to-length shearing (8 ft to 42 ft) save money on factory shed construction?

Accepted Answer

Conventional sheet retailers sell standard 10ft or 12ft sheets requiring multiple end laps across shed purlins. With our computerized cut-to-length shearing from 8ft up to 42ft, single continuous profile sheets cover from shed ridge to eave in one piece. This eliminates 15% to 25% overlap steel scrap, cuts fastener counts in half, and completely eliminates mid-roof joint leak points.

Question 6

What is the difference between PPGL (Galvalume) and PPGI (Galvanized) profile sheets for roofing?

Accepted Answer

PPGL (Pre-Painted Galvalume) features an alloy coating of 55% Aluminum, 43.4% Zinc, and 1.6% Silicon (AZ-70 to AZ-150 GSM). It offers 4 to 6 times longer corrosion and heat resistance compared to traditional PPGI (Pre-Painted Galvanized Iron which uses pure zinc). For industrial factory sheds, warehouses, and harsh weather environments in Nagpur and Central India, PPGL is strongly recommended.

Question 7

Do you supply complete roofing accessories (ridges, gutters, polycarbonate skylights, screws)?

Accepted Answer

Yes, we stock and roll-form all 8 critical accessories from matching primary steel coils: Plain Ridges, Profile Ridges, Eave Gutters, Barz Boards (gable trims), Eave End Flashing, Corner Flashing, Crimp Curves, and Self-Drilling Fasteners (55mm and 25mm screws with weatherproof EPDM washers) along with matching profile polycarbonate skylight sheets.

Question 8

Where is your office located, and what is the dispatch timeline for roofing materials?

Accepted Answer

Our regional sales office is located at Plot No-172, Gorewada Road, Utthan Nagar, Nagpur, MH - 440013. We coordinate direct mill shipments and regional supply of standard shades (Light Blue RAL 5012, Off-White RAL 9002, Terracotta RAL 3009, Moss Green, Bare Galvalume). Standard orders are dispatched within 24 to 48 hours directly to project sites across Nagpur, Vidarbha, Chhattisgarh, and Madhya Pradesh via dedicated transport.

Question 9

Do you provide Mill Test Certificates (MTC) and GST invoices for B2B input tax credit (ITC)?

Accepted Answer

Yes, 100% of our material is prime mill-certified from JSW Steel, Jindal, and AM/NS India. Every commercial order is issued with genuine manufacturer Mill Test Certificates (MTC), certified computerized weighbridge slips, and 100% compliant GST tax invoices (HSN 7210 / 7308) enabling your company to claim full 18% Input Tax Credit (ITC).

Colour Coated Profile Sheets

Technical Specifications & Material Standards

Need Exact Structural Calculations?

Recommended Applications

Engineering Advantages

Zero Micro-Cracks

Anti-Capillary Groove

Extreme Wind Uplift Resistance

Compatible Structural Accessories Available from Stock

Request an Official Quote for Colour Coated Profile Sheets

Explore More Roofing & PEB Materials

Bare Galvalume Profile Sheets

Polycarbonate Profile Sheets

Turbo Ventilator with Polycarbonate Base Plate