HomeGuidesHow to Calculate Roofing Sheet Quantity for a Factory Shed
All Technical Guides
Engineering & BOQ5 min read•Published 2026-11-09

How to Calculate Roofing Sheet Quantity for a Factory Shed

Avoid a 5%–7% site shortage by sizing sheets using the 1020mm effective cover width, single-span custom cut lengths (8ft to 42ft), and the steel girth tonnage formula.

1. Always Use 1020mm Effective Coverage — Not 1072mm Overall Width

Standard trapezoidal industrial roofing sheets are roll-formed from 1220mm wide steel coils, producing an overall sheet width of roughly 1070mm to 1072mm. During installation, one full crest (50mm–52mm) overlaps onto the adjacent sheet to prevent monsoon water ingress.

Because of this mandatory side lap, the actual laying width is 1020mm (3.346 ft). Estimating quantity using the 1072mm overall width creates an immediate 5% to 7% sheet deficit on site.

  • Raw Mill Coil Width: 1220 mm
  • Roll-Formed Overall Width: 1070 mm – 1072 mm
  • Side-Lap Allowance: 50 mm – 52 mm (1 complete rib crest)
  • Effective Laying Cover Width: 1020 mm (3.346 ft)

2. Formula for Total Sheet Count Per Roof Slope

Measure the shed building length along the eaves in feet and divide by 3.346 ft, always rounding up to the nearest integer per slope.

Using computerized cut-to-length profiling from 8 ft up to 42 ft allows one continuous sheet from roof ridge to eave in a single span. This eliminates slope end-laps that otherwise waste 15%–25% material and create mid-roof leak points.

Sheets Per Slope = CEIL(Shed Length in Feet ÷ 3.346)

3. How to Calculate Steel Weight & Fastener Quantities

Structural mild steel and galvalume substrates weigh 7.85 kg/m² per 1mm thickness. Roll-forming flat coil into 28mm deep trapezoidal crests adds roughly 18% steel girth per unit of plan area.

Weight (Kg) = Plan Area (Sq.M) × Thickness (mm) × 7.85 × 1.18
  • 55mm Crest Fixing Screws (EPDM washer): Plan ~4.5 fasteners per square meter into steel purlins.
  • 25mm Valley Stitching Screws: Plan ~2.5 fasteners per square meter along side overlaps every 450mm.
Recommended Tools & Specs
Ready to price your project using Colour Coated Profile Sheets?

Get a Project Quote for Colour Coated Profile Sheets

Direct mill pricing across Nagpur, Vidarbha, and Madhya Pradesh.

WhatsApp Spec Quote
CallWhatsAppGet Quote