HomeGuidesUnderstanding G550 Steel and AZ-150 Galvalume Coating
All Technical Guides
Steel Standards4 min read•Published 2026-11-09

Understanding G550 Steel and AZ-150 Galvalume Coating

Learn how to read yield strength (G550 vs soft steel) and Aluminium-Zinc coating mass (AZ-70 to AZ-150 GSM) on Mill Test Certificates before ordering roof coils.

What G550 (550 MPa Yield Strength) Means on a Roof

The "G" number under AS 1397 / IS 14246 / ASTM A792M standards indicates minimum structural yield strength in megapascals (MPa). G550 coil resists permanent bending up to 550 MPa.

High-tensile 550 MPa sheets maintain flat rigidity across 1.4m–1.6m purlin spans at 0.50mm thickness, resist denting when installation crews walk on purlin lines, and hold against high monsoon wind uplift (IS 875 Part 3).

  • Softer commercial grades (~300 MPa) oil-can and ripple easily across wide purlin spans.
  • G550 sheets allow safe single-span roll-forming from 8ft to 42ft without buckling during crane handling.

Comparing AZ-70, AZ-100, and AZ-150 GSM Alloy Coating

"AZ" specifies total Aluminium-Zinc alloy coating mass in grams per square meter (g/m²) summed across BOTH sides of the steel sheet. Higher coating mass directly extends sacrificial rust defense, especially at sheared cut edges.

  • AZ-70 GSM: Light interior cladding, short-span partitions, and low-corrosion dry storage sheds.
  • AZ-100 / AZ-120 GSM: Standard general warehousing and commercial sheds.
  • AZ-150 GSM: Heavy industrial plants, cement/mineral zones (Katni/Chandrapur), chemical godowns, and long-life PEB roofs.

Why Mill Test Certificates (MTC) & Weighbridge Slips Matter

Always ask your supplier for primary Mill Test Certificates (from mills like JSW Steel, Jindal Steel, AM/NS India, or Tata Steel BSL) verifying base metal thickness (BMT/TCT), tensile yield strength, and coating GSM alongside computerized weighbridge slips.

Recommended Tools & Specs
Ready to price your project using Colour Coated Profile Sheets?

Get a Project Quote for Colour Coated Profile Sheets

Direct mill pricing across Nagpur, Vidarbha, and Madhya Pradesh.

WhatsApp Spec Quote
CallWhatsAppGet Quote